X22二手室外防水球形监控头

kke

SPECIFICATIONS
Pick-up device: 752 (H) x 582 (V) pixels, Interline transfer CCD
Scanning area: 4.8 (H) x 3.6 (V) mm (Equivalent to 1/3” pick-up tube)
Scanning: 625 lines/50 fields/25 frames
Horizontal: 15.625 kHz
Vertical: 50 Hz
Synchronization: Internal, Line-lock (only 24 V AC or 220-240 V AC), or Multiplexed vertical drive (VD2)
Video output: 1.0 V [P-P] PAL composite 75 Ω/BNC connector
Horizontal resolution: 480 lines
Signal-to-noise ratio: 50 dB (Equivalent to AGC Off, weight On)
Minimum illumination: 1.0 lx (0.1 footcandle) (WIDE),
Detail: SHARP or SOFT, selectable
White balance: ATW
Lens Mount: CS-mount
Lens
Focal length: 3.8 mm - 8 mm
Maximum aperture ratio: 1:1.4 (Wide), 1:1.8 (Tele)
Angular field of view: Horizontal: 35.6 ° - 73.6 °
Vertical: 26.6 ° - 53.4 °
Focusing range: 1.2 m - ∞ (3.9 ft - ∞)
Ambient operating temperature: –10 °C - +50 °C (14 °F - 122 °F)
–30 °C - +50 °C (–22 °F - 122 °F)
(When the optional heater unit built in)
Ambient operating humidity: Less than 90 %

Power source and
Power consumption: WV-CW244FE: 12 V DC, 265 mA (Camera)
24 V AC 50 Hz, 3.0 W (Camera)
24 V AC 50 Hz, 12.1 W (Heater unit)
WV-CW240S: 220 V - 240 V AC 50 Hz
4.1 W (Camera)
13 W (with heater)
Dimensions: WV-CW244FE: 160.5 mm (H) 154 mm (D)
6-5/16" (H) 6-1/16" (D)
WV-CW240S: 161 mm (H) 160 mm (D)
6-3/8" (H) 6-5/16" (D)
Weights: WV-CW244FE: 1.4 kg (3.1 lbs.)
WV-CW240S: 2.1 kg (6.4 lbs.)
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

STANDARD ACCESSORIES
Operating Instructions............................................................ 1 pc.
The following are for installation.
Attachment ............................................................................ 1 pc.
Tamperproof screw bit .......................................................... 1 pc.
Camera mounting bracket (supplied only to WV-CW240S)... 1 pc.
Attachment fixing screw (supplied only to WV-CW240S) ..... 4 pcs.